Télécharger Imprimer la page

Publicité

Liens rapides

SUNSHOWER PURE
Installation manual Part 2 / Installatie handleiding deel 2 / Installationshandbuch Teil 2 / Manual d'installation Partie 2
Art.no: 80073
P1503 Rev. A
09-2016

Publicité

loading

Sommaire des Matières pour Sunshower PURE 80073

  • Page 1 SUNSHOWER PURE Installation manual Part 2 / Installatie handleiding deel 2 / Installationshandbuch Teil 2 / Manual d’installation Partie 2 Art.no: 80073 P1503 Rev. A 09-2016...
  • Page 2 Requirements / Benodigdheden / Materialbedarf / Matérial nécessaire In the box / In de doos / In der Verpackung / Dans la boîte Requirements / Benodigdheden / Erforderliches / Équipment Manual Manual NOT Supplied / NIET Meegeleverd / NICHT im Lieferumfang enthalten/ NON fourni 110mm max 3m Glass pane / Glasplaat / Glasplatte / Plaque en verre...
  • Page 3 Electrical connection / Electrische aansluiting / Stromanschluss / Branchement électrique Example / Voorbeeld / Beispiel / Exemples • Make sure the flatcable is at the front side! • Zorg ervoor dat de flatcable aan de voor- zijde zit! • Stellen Sie sicher, dass das Flachbandkabel an der Vorderseite ist! •...
  • Page 4 Mounting housing / Monteren behuizing / Gehäuse montieren / Montage du caisson Example / Voorbeeld / Beispiel / Exemples Requirements / Benodigdheden / Erforderliches / Équipment / Manual Instructions / Instructies / Anleitung / Instructions : Mount the reflector with the 4 supplied screws. : Monteer de reflector met de 4 bijgeleverde schroeven.
  • Page 5 Mounting glass / Monteren glas / Glasmontage / Montage du verre Example / Voorbeeld / Beispiel / Exemples Instructions / Instructies / Anleitung / Instructions : Connect the connector to the backside of the glasspane and place the glass pane in the reflector (see detail A). : Sluit de connector aan op de printplaat en plaats de glasplaat in de reflector (zie detail A).
  • Page 6 Sunshower Pure zal even knipperen. (raak tijdens het knipperen de aan/ uit toets niet aan, de Sunshower Pure is aan het kalibreren). Indien de aan/ uit toets niet knippert controleer of de connector, in stap 5, goed is gemonteerd.