Brief Introduction; Bluetooth® Wireless Communication Technology; About Bteasy; Before Use - Cellularline BTEASY Manuel D'utilisation

BTEASY
Welcome to use this Bluetooth® interphone, BTEASY .
Please read this user's manual carefully before use .

- Brief introduCtion

1. Bluetooth® wireless communication technology
Bluetooth® is a standard of close range wireless technol-
ogy that was drawn up by Ericsson, IBM, Intel, Nokia and
Toshiba . With Bluetooth® technology, we can achieve
the highest transmission rate among cell phones, com-
puters, printers, PDAs and other devices . The max trans-
mission range of class II is 10 meters while the max
transmission range of class I can reach up to 100 meters .

2. about BteasY

BTEASY is a Bluetooth® interphone designed for the
motorcycle rider and passenger who wish to have
clear and reliable wireless communications while rid-
ing . It can also be connected to a Bluetooth® cell phone
for hands-free communication . It has the following
features:
1) two interphone headsets connect to use intercom
feature:
- Send out intercom
- Answer intercom and reject intercom
- End intercom
- Adjust the volume
2) BteasY pairs with a Bluetooth® cell phone:
- Answer a call, end a call and reject a call
- Redial last number
- Adjust the volume
3) the interphone can connect to another inter-
phone and a Bluetooth® cell phone at the same
time:
- Dial a number during intercom
16
- Answer a call during intercom

- Before use

1. Package contents

Bluetooth® interphone
usB charging cable
(thin) (thick)
velcro attached to interphone headset
(thin) (thick)
velcro attached to ear speaker

2. overview

vol– - Turn down the volume and send out
1
intercom
2 LED indicator
mfB button - Power on/off, redial last
3 number, answer/reject a call, answer/reject
intercom
USB port - It is a charging port and is used
4
as a port for connecting to microphone and
ear speaker
vol+ - Turn up the volume and send out
5
intercom
6 Ear speaker
7 Microphone

- installing the interPhone

BTEASY
1. installing the velcro attached to interphone head-
set
1) Before removing the protective strip from the dou-
ble-sided adhesive, find the best location to place the
velcro .
2) Clean the part of the helmet that the interphone
headset with adhesive will be attached to . Remove
any dirt or grease . Do not use cleaners that may dam-
age the helmet or that will leave an oily residue .
3) Check again the position of the velcro . Once it is fixed,
it will not be possible to move .
4) Make sure the surface is dry before continuing .
Remove the protective strip from the double-sided
adhesive and carefully fix the velcro to the outside
shell of the helmet .
note: There are two types of velcro, thin and thick . It is
recommendable to use the thick velcro when the curva-
ture in the surface of the helmet is large .

2. installing the interphone headset

Take your interphone headset, make the USB port
points down and attaches the interphone headset to
the velcro .
IT
EN
FR
ES
DE