Brandson 303503 Mode D'emploi page 49

10. Cleaning and Care
• Keep all safety guards, vents and the motor housing free from dirt
and dust as far as possible. Wipe the device with a clean cloth or
blow it clean using low-pressure compressed air.
• It is advisable to clean the device immediately after each use.
• Clean the device regularly with a damp cloth and some soft soap. Do
not use cleaning agents or solvents; these could damage the plastic
parts of the device. Ensure that water does not get into the device.
• A few drops of oil (e.g. sewing machine oil) improves the cutting per-
formance of the blades, but never apply grease to the blades.
• In order to ensure that cutting is always accurate, it is also impor-
tant to remove grass and dirt residues between the top and bottom
blades.
English
49