Package Contents - Autoleads ADI-300 Mode D'emploi

Package Contents

The DAB/DAB+ receiver is used to select radio stations
and change settings.
The active antenna is mounted to the inside of the
windscreen and is connected to the DAB/DAB+ receiver
(MCX connector)
The magnetic holder is used to mount the DAB/DAB+
receiver to the vehicle air vent.
The 3.5mm cable is used to connect the DAB/DAB+
receiver to the auxiliary input on the vehicle radio if present.
The flexi 12v power socket adapter is used to mount and
power the DAB/DAB+ receiver. The metal flexi mount can
be adjusted to a position for optimal viewing. This also
features a USB charger. Max output is 5V 2.1amp.
The Dual USB charger is used to power both the
DAB/DAB+ receiver and charge an additional device.
Max output is 5V 4.8amp combined.
The Micro USB cable is used in conjunction with the dual
cigarette lighter adapter to power the DAB/DAB+ receiver
when installed using the vent mount magnet holder.
A replacement fuse is provided (if required).
4