Kärcher G 2600 VH Mode D'emploi page 8

STEP 6:
Place the quick connect nozzles in the nozzle
holder.
STEP 7:
Assemble Hand grip to the spray lance.
STEP 8:
Attach the wand to the spray gun.
STEP 9:
Pull the spring-loaded collar of the wand back
to insert your choice of quick connect nozzle.
Release the collar and push the nozzle until
the collar clicks.
8
English
WARNING
High pressure in nozzle area.
Risk of injury caused by improperly locked
nozzle.
Make sure you hear a 'click' when inserting
the nozzle tip into the wand.
Pull the nozzle to make sure it is seated prop-
erly before operating your unit.
STEP 10:
Pull back the springloaded collar at the spray
gun and insert the high pressure hose.
Release the collar and push the high pressure
hose until the collar clicks
WARNING
High pressure in quick connect area.
Risk of injury caused by improperly locked
high pressure hose.
Make sure you hear a 'click' when inserting
the high pressure hose into the quick connec-
tion.
Pull the high pressure hose to make sure it is
seated properly before operating your unit.