GreenWorks Commercial GL 900 Manuel Du Propriétaire page 7

OPERATION
4. Insert the plug (6) on the other side into the socket (7) of the adapter – line up the lugs on the
plug with the slots in the socket.
5. Push the plug into the socket until it stops, (8) then turn it clockwise until the plug's latch (8)
engages audibly.
Positioning the Cable
The cable can be fitted in different cable ducts depending on whether the power tool is being
operated next to or behind the user:
Fit the cable in one of the lateral cable ducts and push it into place.
Always use the cable outlets at the side on which the power tool is held and controlled.
W A R N I N G
To reduce the risk of accidents, never lay the cable diagonally – it may snag on objects.
If the cable is too long, attach it to the retainer on the bag.
8
7