GreenWorks Commercial GL 900 Manuel Du Propriétaire page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS
Do not place the battery pack in the sun or in a warm environment. Keep at normal room
temperature.
Do not use a battery pack that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
The battery pack cells may develop a small leak under extreme usage or temperature
conditions.
If the outer seal is broken and the leakage gets on your skin:
Use soap and water to wash immediately.
Neutralize with lemon juice, vinegar, or other mild acid.
If leakage gets in your eyes, follow instructions above and seek medical attention.
CALIFORNIA PROPOSITION 65
W A R N I N G
This product and some dust created by power sanding, sawing, grinding, drilling, and other
construction activities may contain chemicals, including lead, known to cause cancer, birth defects
or other reproductive harm. Wash hands after handling.
Notes on Cable
1. Check the adapter and its cable and plug for signs of damage. Never use a damaged adapter,
cable or plug.
2. Make sure the insulation of the cable and plug is in good condition.
3. Straighten a twisted cable before use.
4. Position the cable so that it cannot be reached or damaged by the cutting or working
attachment of the power tool being used.
5. Do not chafe, squash, jerk or damage the cable. Protect it from heat, oil and sharp edges.
6. Do not use the cable for any other purpose. Do not use the cable for carrying or hanging up
the battery or power tool. Do not tug the cable.
7. Position the cable so that it does not endanger others. If mishandled there is a risk of tripping
or stumbling.
Notes on Operation
Disconnect battery from the power tool:
when carrying out tests and adjustments or cleaning
before working on the power tool's cutting or working attachment
before leaving the machine unattended
when transporting
storing the machine
before performing repairs and maintenance work
in the event of a malfunction or in an emergency
This avoids the risk of accidental startup.
4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2907402

Table des Matières