Publicité
Les langues disponibles
Les langues disponibles
FUNCTIONS OF THE CD PLAYER
1. POWER BUTTON
Press the POWER switch to turn the unit on. Press the POWER switch again to turn the unit off.
2. EJECT BUTTON
Press this button to load or eject disk. Each press will open or close the disk tray.
3. JOG
a) PITCH MODE
In pause mode, if you turn the jog, the point at which the sound is being produced moves by a number of
frames corresponding to the number of clicks. Dialling clockwise moves the point forward, dialling
counter-clockwise moves the point backward.
In play mode, the jog increases or decreases the speed of the song. (clockwise: increase, counter-
clockwise: decrease)
b) SEARCH MODE
Turn the jog to select the scanning direction and speed.
c) SCRATCH MODE
Use this jog to scratch effect.
4. JOG MODE
Press this button to select the PITCH, SEARCH or SCRATCH.
5. PLAY MODE
Press this button to select the CD, USB stick or SD card.
6. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started.
7. PLAY / PAUSE BUTTON
Each time you press the PLAY / PAUSE button, the operation changes from play to pause or from pause to
play.
8. BRAKE BUTTON
Press this button to open the BRAKE effect.
9. REV. BUTTON
Press this button to open the REV. effect.
10. IN BUTTON
Press this button to set the beginning of the loop.
11. OUT BUTTON
Press this button to set the end point of the loop.
12. RELOOP BUTTON
Press this button to repeat the last loop.
13. FOLDER BUTTON
Press this button to select the folder or the track.
14. TRACK POT
Use this pot to select the previous track or next track.
15. CONTINUE / SINGLE BUTTON
Press this button to switch between the SINGLE and CONTINUE play mode. The selected mode is indicated
on the LCD. In SINGLE mode, after each track, the unit will stop the reading. In CONT. mode, the unit will
read all tracks and then stop.
16. LOCK BUTTON
Press this button to lock the pitch fader.
17. PITCH BEND - BUTTON
The pitch will drop while the PITCH BEND – button is pressed and return to the original pitch when it is
released.
18. PITCH BEND + BUTTON
The pitch will increase while the PITCH BEND + button is pressed and return to the original when it is
released.
19. PITCH BUTTON
Press this button to select the 4%, 8% or 16%.
20. TIME BUTTON
Use this button to choose the time mode: elapsed time, remaining time or total remaining time.
21. PITCH CONTROL
Use this fader to increase or decrease the speed of the track.
22. LCD DISPLAY
23. DIN SOCKET
Connect all the sockets using the DIN cable provided with the CD player. Connect the play 1 with the part 1 of
the controller and the player 2 with the part 2 of the controller.
GB
3
Publicité
