Germania BSM9N Manuel D'utilisation page 19

United kingdom type gas connection;
77l
6
WARNING: The gas hose must not be clamped, bent ar trapped or come
into contact with hat parts of the product. There is the risk of explosion
due to damaged gas hose.
Gas hose passage way
Figure 1
Figure 2
WARNING: Before placint the appliance, check that the local distribution
conditions (gas type and pressure) conform to the product settings.
F
rn
c, __ _
r
5 /
4
1. Gasket
2
2. Adapter
3. Gas (safety) hose
4. Valve with 90° outlet
5. Connection piece
6. Gas supply pipe
Connect the appliance to the gas piping tap
in shortest possible route and in a way
that ensure no gas leakage will occur.
In order to carry on a tightness and sealing
safety check ensure that the knobs on
the control panel are closed and the gas
cylindir is open.
WARNING: While performing a gas leakage
check, never use any kind of lighter,
match, cigarette or similar burning
substance.
Apply soap bubble on the connection
points. If there is any kind of leakage
then it will cause bubbling.
While inserting the appliance in place
ensure that it is on the same level with
the worktop. If required adjust the legs
inorder the make level with the worktop.
Use the appliance on a level surface and
in a well ventilated environment.
19