Waeco MyFridge MF-40 Notice D'utilisation page 24

_mf-40.book Seite 24 Montag, 3. Dezember 2007 11:08 11
Operating the cooler
7.2 Using the cooling device
I
Note
Like every cooling device, your cooler must be properly ventilated
so that any heat created can be drawn off. Otherwise proper
functioning cannot be ensured.
➤ Switch the cooler on by turning the temperature control (fig. 3 1 page 4)
clockwise.
✓ The cooler starts cooling the interior.
You can set the temperature to any level using the control knob. The built-in
thermostat regulates the temperature as follows:
1 = least cooling
7 = most cooling
a
Warning
Only put items in the cooler which can be kept at the selected
temperature.
➤ If you stop using the cooler, turn the temperature controller (fig. 3 1,
page 4) to "0".
I
Note
If you are not going to use the cooler for a long time, leave the door
slightly ajar to prevent unpleasant odours building up.
24
MyFridge MF-40