sunjoe AJ798E Manuel De L'opérateur page 8

Fig. 2
Phillips screws
2. Secure the two middle handle bars to the lower handle
bars using the first set of knobs and bolts. Tighten the
knobs on each side to ensure a secure fit (Fig. 3).
Middle
handle
bars
Lower handle
bars
Lower handle
knob + bolt
3. Slide the switch box on the left side of the upper handle
frame until it clicks and locks in position (Fig. 4).
Fig. 4
Switch
box
4. Connect the upper handle frame to the middle handle
bars using the second set of knobs and bolts. Tighten the
knobs on each side to ensure a secure fit (Fig. 5).
Upper handle
knob + bolt
Middle handle
bars
5. Fix the cord with cord clips to the middle and lower
Fig. 3
handle bars (Fig. 6).
Cable clips
Thatch Collection Bag Assembly
m
Upper handle WARNING!
frame
the thatch collection bag attached. This could pose a danger
of flying debris.
m
WARNING!
cutting device must have stopped rotating before you attach or
empty the thatch collection bag.
m
WARNING!
collection bag securely fitted.
NOTE: A full thatch collection bag will reduce the performance
of this product.
8
Upper handle
frame
Do not attempt to use the product without
The product must be switched off and the
Never use the scarifier without the thatch
Fig. 5
Fig. 6