Grape BTS-1000 Mode D'emploi page 3

Connection:
Connection to a TV is used as an example. The procedure to connect to
other types of audio devices is the same.
1. Connect one end of the included 3.5 audio cable to 'Audio In' on
the BTS-1000.
2. Connect the other end of the cable to an audio output on your TV.
See your TV user manual for more information.
3. Connect the USB Type A connector to the USB port on your TV set.
Alternatively connect to an USB power adaptor (not supplied).
Note: The USB port must have the powering capability of min. 500mA
Operation:
Connect a first Bluetooth receiver (headset, speaker or music receiver)
1. Take the Bluetooth receiver and set it to "pairing" mode. See your
receiver user manual for more information.
2. The BTS-1000 will auto connect to the "pairing" receiver. When
BTS-1000 and receiver are connected, the LED on BTS-1000 will
go to permanently lit.
Connect a second Bluetooth receiver (headset, speaker or music
receiver)
1. Take the second Bluetooth receiver and set it to "pairing" mode.
See your receiver user manual for more information.
2. Press the "pairing" button on BTS-1000 for one second. The LED
3