Bartscher 252LW Mode D'emploi page 37

Control panel, indicators
①
Digital temperature display
Digital temperature display indicates the current temperature inside the frezer.
It is battery powered. The battery compartment is next to the display.
②
Temperature control
The temperature may be adjusted with the temperature control in the range 1-7.
Position 1 – gentle cooling, position 7 –lowest temperature
The setting temperature should reflect
ambient temperature of the device
quantity of the stored food items
frequency of opening of the device lid.
We recommend the middle position, and following your own observations you
will be able to find the best setting for your device.
③
Green light POWER
Green light POWER should glow always when the device is plugged in
and switched on.
④
Red light ALARM
Red light ALARM glows when the internal temperature is too high. The red light
glowing may be caused by the following:
first start-up of the device
start-up after defrosting
inserting fresh food items for freezing
In the cases listed above, it is normal that the red light glows. The indicator
will be off when the temperature inside the freezer reaches around -15 ° C.
⑤
ON/OFF switch
⑤
④ ③
①
②
- 33 -