Lanaform Beauty Aspect Manuel D'utilisation page 6

For the "ROLL" action, the «BEAUTY ASPECT» has 4 body tissue roller heads (15, 25, 35 and 55mm).
EN
"ROLL": Deep action for a sculpting effect.
4 roller heads sizes (15, 25, 35 and 55mm) for the different parts of the body. Each head is equipped with "3 integrated
rollers" to improve the effectiveness of the massage.
Warning:
• To use a roller head, simply turn it clockwise into the main handle. Remove it by turning it anticlockwise.
• NEVER change the rollers near your eyes.
For the "LIFT" action, there are 3 tissue sculpting heads for face neck and chest tissue (10, 12 and 18mm).
"LIFT": Skin exercises for a toning action.
3 sculpting heads, 10, 12 and 18mm, for various applications.
The 10 and 12mm sculpting heads are used for particularly delicate areas, such as the eyes and nose.
The 18mm sculpting head has a fixed ball for larger areas.
Just move the sculptor over the area to be treated.
Warning:
• When using a sculpting head, first place it on the "tissue sculpting head support" and then onto the main
handle. Remove it by pulling gently.
• NEVER change the sculptor near your eyes.
1) Insert the adapter in the "socket" located on the back of the box.
2) Plug the adapter into the domestic power point (AC 100-240V).
3) Once the adapter is plugged in, the Standby/Start symbol "
standby mode. When you press this button, the appliance starts up and the light "
again to return to standby mode.
4) On the control panel, you can select the following functions:
- Long suction or 4 possible programmes:
For long suction, press button "1" for about 2 seconds until you hear a "click". If you press "1" and release the button
immediately, it will go into programme "1" suction mode.
6
" lights up green. The "BEAUTY ASPECT" is currently in
" turns red. Just press the button