Samsung MX-HS8000 Manuel D'utilisation page 22

Masquer les pouces Voir aussi pour MX-HS8000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
Functions
3.
Set the timer switch-on time.
a. Press the TUNING/ALBUM , or .
button to set the hours.
b. Press the ¬ button.
Result: The minutes flash.
c. Press the TUNING/ALBUM , or .
button to set the minutes.
d. Press the ¬ button.
Result: OFF TIME is displayed for a few
seconds. You can now set the timer
switch-off time.
4.
Set the timer switch-off time.
a. Press the TUNING/ALBUM , or .
button to set the hours.
b. Press the ¬ button.
Result: The minutes flash.
c. Press the TUNING/ALBUM , or .
button to set the minutes.
d. Press the ¬ button.
Result: VOLUME XX is displayed, where
XX corresponds to the volume already
set.
5.
Press the TUNING/ALBUM , or . button
to adjust the volume level and press the ¬
button.
Result: The source to be selected is
displayed.
6.
Press the TUNING/ALBUM , or . button
to select the source the Hi-Fi Component will
play when it switches on.
If you select
You must also
a. Press the ¬ button.
FM (radio)
b. Select a preset station
CD (compact
Load a compact disc.
disc)
USB
Connect a USB device.
by pressing the
TUNING/ALBUM ,
or . button.
22
English
7.
Press the ¬ button.
Result: TIMER REC SET (Do you want to
record?) is displayed.
8.
Press the ¬ button.
Result: REC SET YES/NO is displayed. You
can press the TUNING/ALBUM , or .
button to select REC YES or REC NO, and
then press ¬ button.
1) If you select REC NO, it will cancel tuner
timer recording and any currently set tuner
timer recording. Note that selecting REC
NO does not cancel the Timer setting.
2) If you select REC YES, you can set the
tuner timer recording on and off times.
a. Press the ¬ button.
Result: ON TIME is displayed for a few
seconds. You can set the tuner timer
recording switch-on time.
b. Press the ¬ button.
Result: OFF TIME is displayed for a
few seconds. You can set the tuner
timer recording switch-off time.
| NOTES |
✎ Tuner timer recording On/Off times can differ
from Timer On/Off times.
✎ If the timer switch on and off times are identical,
the word ERROR is displayed.
✎ You can use the 1 , 2 buttons on the
product instead of the TUNING/ALBUM ,
or . button to make adjustments in Steps 3
through 8.
✎ If the switch-on or -off time is the same as the
timer recording time, only the switch-on or -off
time is effective, and the timer recording is not
applied.
✎ When you use the auto timer, you may need
an additional step to use a CD or USB device
with it, depending on the disc (or device).
Consequently, it is easier to use the tuner
instead.
✎ If you select CD or USB mode when there
is no disc or no USB in the product, it will
automatically change to TUNER.

Publicité

Table des Matières

Dépannage

loading

Table des Matières