Configuration; Connection; Language Settings - Hama 00062789 Manuel D'installation Et D'utilisation

4. Configuration

4.1 Connection

a) Connect the enclosed power supply unit to a socket and the power connection on the back of the device.
b) The display will light up after a few seconds.
c) The wireless internet tuner has a stereo RCA output to connect the tuner to your existing stereo system.
Note: The settings made to the Internet Radio remain the same even after the power supply is disconnected.
You can disconnect the Internet Radio from the mains supply at any time. Reconfiguration is not
necessary.
4.2 Language setting
After you have successfully connected the Internet Radio, it switches on and tries to establish a connection. We
recommend that you set the language settings before configuring the connection.
18
Cancel the connection attempt by repeatedly pressing „Back". The main
menu appears in the display.
Select „Configure" by using the navigation buttons on the remote
control. Confirm your choice by pressing „Select".
Select the „Language" menu item and confirm your selection.
Select the required language. After the device is automatically reset,
you can establish a connection to the network.