Dell Latitude E4200 Guide De Maintenance page 56

Back to Contents Page
TAA Board
Dell™ Latitude™ E4200 Service Manual
Removing the TAA Board
Replacing the TAA Board
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTE: The Trade Agreements Act (TAA) board is optional and may not be present in some computers.
Removing the TAA Board
1. Follow the procedures in Before Working on Your
2. Remove the service panel (see
3. Pull up on the TAA board to disconnect it from the system board.
1 TAA board
3 connector
Replacing the TAA Board
1. Align the connector on the TAA Board with the connector on the system board, and press the TAA board into place.
2. Replace the service panel (see
3. Follow the procedures in After Working on Your
Back to Contents Page
Computer.
Removing the Service Panel).
2 system board
Replacing the Service Panel).
Computer.