Black & Decker HST1500 Traduction Des Instructions D'origine page 5

Assembly
• Rotate and pull down to remove the water tank (10),
open the water inlet cover (13) and fill with tap water
until it reaches the MAXIMUM level. Always ensure the
water tank is at least a third full. Do not exceed the
MAXIMUM level when filling the water tank. Replace the
water tank .
• Hold the appliance with your hand positioned safely at
the neck of the garment steamer in an upright position,
use your other hand to attach the fabric brush (11) onto
the steam head. The fabric brush can be attached one
way only and will lock into position with an audible
"click".
• Connect the appliance to a power outlet and switch on.
Press the power button (4), the power indicator light (5)
will begin flashing, indicating that the appliance has
begun heating. When the light stops flashing, preheating
has finished.
• Press the power button again, the light turn green, at
this time for the ECO mode.
• Switch off the steamer by pressing the power button for
more than 2 second . When the appliance is powered off
the indicator light will extinguish.
• The garment steamer has a intelligent automatic power
off function. When the user stops operating this product
more than 8 minutes time, the products internal control
circuit will be cut off, products will enter standby mode,
to ensure safety and save energy.
• The garment steamer has a bottle connector (12), it can
connect mineral water bottle instead of the water tank
(10), for convenient use when traveling.
Steaming your garment
The garment steamer is easy to use and is perfect for
removing wrinkles/creases from garments and curtains as
well as refreshing furnishing fabrics. It can be used on most
fabrics as long as the fabric is hanging or where the garment
steamer can be easily used in an upright position moving
over the fabric in an up and down motion
• Check that there is ventilation behind the fabric
otherwise moisture may build up causing mildew.
• Check garment pockets are empty and turn-ups such as
cuffs and hems are down.
• Hang the garment from a hanger and stretch the fabric
slightly with one hand checking that there is nothing
behind the fabric that can be damaged by the steam.
Note: We recommend you do not steam over metal
accessories.
• Press and hold down the steam button. You will feel
vibrations and hear a subtle humming sound while
steaming, this is normal. Steam facing away from you
and in an upright position.
• Gently press the fabric brush against the garment,
moving your arm in an up and down motion targeting
(Original instructions)
creases in the fabric.
• Release the steam button to stop the steam.
Note: Ensure that the fabric to be steamed is being stretched
whilst steaming for best results.
Warning! The garment steamer generates high temperatures
of steam.
Do not touch the steam head, make sure the steamer is
facing away from you in an upright position.
• If using the garment steamer without the fabric brush,
keep a distance of at least 5cm between the steam head
and the garment.
Steaming curtains
• Wash and dry curtains as directed, according to the
fabric type.
• Hang the curtains and steam them when they are
hanging in place.
• Lightly stretch the curtain with one hand while steaming
to help remove creases more easily.
Steaming upholstery
• The garment steamer can be used to help freshen up
upholstery, slip covers on furniture and cushions. Before
steaming, always test on a small area of the fabric that is
not visible.
• Keeping the garment steamer in an upright position and
using an up and down motion, lightly steam over the
fabric of your furniture. Cushions should be removed and
held upright for steaming. Allow cushions to dry
thoroughly before replacing on furniture.
Note: It is recommended that you use the fabric brush
attachment when steaming delicate fabrics such as silk. For
better results when removing stubborn creases, remove the
fabric brush attachment from the steam head and
continuously steam over the selected area until creases are
removed.
Warning! If garment has metal accessories, be cautious and
do not use the garment steamer directly over the metal as
this may cause discolouring.
Warning! Always unplug the garment steamer before
attaching or detaching the fabric brush.
Note: Only use attachments or accessories provided.
Note: If the unit becomes noisy and emits a loud humming
sound and no steam is being generated, check the water
level in the water tank. This may indicate that the garment
steamer is out of water and needs to be refilled.
Warning! Do not use the garment steamer directly on the
body, animals, or while wearing the garments.
Cleaning and maintenance & storage
Warning! Before cleaning and maintenance, switch the
appliance off and remove the plug from the socket.
ENGLISH
5