System Requirements - Targus VersaType THZ857 Guide De L'utilisateur

VersaType™ 4-in-1 Keyboard Case
Introduction
Thank you for your purchasing the VersaType™ 4-in-1 Keyboard Case - iPad (7th Gen) 10.2-inch,
iPad Air 10.5-inch and iPad Pro 10.5-inch. The keyboard uses Bluetooth technology which
provides a seamless connection. It's pivoting screen allows you to convert the case between
four different function modes.
The maximum working angle on the keyboard is 130 degrees.
Contents
1. VersaType™ 4-in-1 Keyboard Case
2. USB Charging Cable (for keyboard charging)
3. User Guide

System Requirements

• iPad (7th Gen) 10.2-inch, iPad Air 10.5-inch and iPad Pro 10.5-inch
Establishing Connection with iPad
1. Switch on the Bluetooth keyboard. (Turn on the power by sliding the On/Off Switch
to the right). The Blue LED and Red LED will remain lit for 3 seconds.
2. While the Blue LED is flashing, go to your iPad's Bluetooth settings and select
"Targus THZ857 Keyboard".
3. The Bluetooth keyboard is now connected to your iPad.
4. If the pairing process takes longer than 3 seconds and the Blue LED turns off, reset the
power switch ("OFF" and back "ON") and follow step 2. Or manually press "fn" + "C",
wait for the Blue LED to flash and then follow step 2.
5. Please ensure to configure your iPad to US language.
1
folding line
2 staples here (saddle stitching)
Reconnecting the iPad
If another Bluetooth device has recently been connected to your iPad, follow steps 1 and 2 to
reconnect. The Blue LED will flash while the keyboard is reconnecting.
Trouble Shooting (Bluetooth connection)
• Make sure the bluetooth keyboard is fully charged.
• If the power indicator lights red, it's indicating that the battery is low and needs to be charged.
• On your iPad, click on the Bluetooth icon within the system preferences panel. Refer to the
2
• Make sure there are no other Bluetooth devices in close proximity.
• If your iPad is connected to other Bluetooth devices, you may need to disconnect some
3 devices before you can connect to the keyboard.
• If the keyboard is still not recognized, make sure the correct version of software is installed.
Charging the Keyboard
The Bluetooth Keyboard requires charging when the Power indicator lights up Red.
1. Connect the keyboard to a USB power source with the USB charging cable.
2. The charging Red LED will remain lit until the keyboard is fully charged. Keyboard input rating
3. Under standby mode, the fully charged keyboard provides 180 days of battery life.
Bluetooth and Battery Charging Indicators
folding line
2 staples here (saddle stitching)
VersaType™ 4-in-1 Keyboard Case
Apple Bluetooth help file to ensure Bluetooth is working properly.
Verify the iOS version for compatibility.
is DC 5V, 450mA.
Pairing Flashes Blue until keyboard is paired.
Charging Lights Red when the keyboard battery is being charged.
Lights Red when the battery voltage is less than 3.3V, power off when battery voltage
Battery Level
less than 3V.
2