Manfrotto 522P Instructions page 4

CONNECTING WITH THE CAMERA
Note!
In order to avoid accidentally short circuiting the controller connector,
NEVER disconnect the cable from the controller, unless you need to
exchange the cable.
The Controller is designed to work only with Panasonic AG-DVX100 and
AG-DVC80 video cameras which have a 2.5 mm stereo jack marked
"CAM REMOTE".
Never connect the controller to any other camera or jack, as you risk
permanent controller and/or camera damage!
1. Switch the camera off
2. Connect the other end of the cable to the "CAM REMOTE" plug on the camera
3. Switch the camera on
4. Press the 'digital' button - you may now start using the controller
4