U.S.Robotics USR8402 Guide D'installation Rapide page 2

English
Installation
1. Unplug all peripherals and power cords connected to your
computer.
2. Shut down your computer.
3. Remove the cover from the computer case.
4. Locate an available PCI Express slot
and remove the bracket cover.
5. Insert the card into the open PCI
Express slot and fasten the bracket to
the case.
6. Connect 4P power cable from the
computer's power supply to the card.
7. Place the cover back onto the
computer.
8. Plug your computer in and turn it on.
9. Insert the provided CD into your disc drive. Double-click the
setup.exe file in the Driver folder to launch the installation
program.
10. Accept the End User License Agreement and click Next.
11. Click Browse to choose the Destination Folder, then click
Next.
12. Click Install.
13. Click Finish to complete the setup process.
This product is subject to the U.S. Robotics Corporation
Limited Warranty. To view a copy of the Limited Warranty and for
information on how to contact U.S. ROBOTICS Technical Support,
please see the U.S. ROBOTICS corporate web site at:
www.usr.com/support