Installation; Package Contents; Before You Begin - U.S.Robotics USR7903 Guide D'installation Rapide

Installation

Package Contents

Gigabit Ethernet
CardBus NIC

Before You Begin

If you use Windows Me or 98, you may need your operating system installa-
tion CD-ROM to complete the installation procedure.
For the most current installation instructions, visit www.usr.com/support
Step One: Install the software
1. Insert the U.S. Robotics Installation CD-ROM into your CD-ROM drive.
2. Select your preferred language, then review the License Agreement
and click Yes.
3. Select Installation.
When the installation wizard appears, click Next.
4.
Click Next; click Next again.
5.
If you see a prompt regarding Windows Logo testing, click Continue
*
Anyway. If a Digital Signature Not Found window appears, click Yes.
6. Wait while the wizard installs the software, then click Finish.
* U.S. Robotics has thoroughly tested this driver in conjunction with the supported hardware and
has verified compatibility with Windows XP, Me, and 2000.
Installation CD-ROM
Quick Installation Guide
(this guide)
*
3