Martinelli ISOFIX BASE 0+1 K Mode D'emploi page 9

from those indicated. This would result in the
risk of detachment from the seat.
• Child car seat base, group 0+, "Semi-
Universal" category, class E for use with any
models of the car seat "Primo Viaggio SL"
. Approved under European standard ECE
R44/04 for children weighing from 0 to 13 kg
(0 to 12/14 months). Only for use in vehicles
fitted with Isofix approved points (for details
see the list of car models fitted with Isofix
attachment systems).
• Child car seat base, group 1, "Semi-Universal"
category, class A for use with Viaggio1
Duo-Fix and all its models. Approved under
European standard ECE R44/04 for children
weighing from 9 to 18 kg (from 9 months
to 4 years approx). It can only be used in
vehicles with approved Isofix points.
• Check the vehicle's use and maintenance
manual to see whether it is compatible with
Isofix child restraint systems.
• If you are unsure of anything, contact the
manufacturer or the retailer of this child car
seat.
• Do not remove the stickers; this could mean
that the product no longer conforms with
standards.
• Do not use this base if it is broken or has
missing parts, if it is second-hand or of
uncertain origin, or if it has undergone
violent strain in an accident, as it may have
suffered extremely dangerous structural
damage.
• Do not modify the product.
• For any repairs, replacement parts or
information on the product, contact the
post-sales assistance service. The relevant
information is provided on the last page of
this manual.
• Do not use this base after a period of 7 years
has passed from the date of production
indicated on the bottom. The natural ageing
of the materials may mean that it is no
longer compliant with standards.
Instructions for use in car
1• Find the Isofix attachment points on the car
seats.
2• Lengthen the Isofix attachments on the base
by pressing the lever as shown in the figure,
to facilitate fastening.
3• Extract the support leg from under the
base and fold it outwards until it clicks into
position. Position the base on the car seat as
shown in the figure, aligned with the Isofix
attachments.
4• Engage the attachments on the base to the
seat buckles (check that there is nothing
interfering with the seat buckles that could
stop them from functioning properly).
IMPORTANT: The two signals on the
•
sides of the handle go from red to green to
indicate that it is properly attached.
IMPORTANT: Once the procedure is
•
complete, move the base to check that both
Isofix points are actually attached.
5• Adjust the height of the support leg by
pressing down the inner catch until it
touches the car floor (it is important for the
leg to be well supported on the car floor
even if this causes the base to be slightly
raised from the vehicle seat).
• Once the above steps are complete, "Isofix
Base 0+1 K" can remain in the car ready for
use.
• If your car has storage compartments on the
floor of the vehicle, in the area where the
support leg is to rest, you should open the
compartment and rest the leg on the bottom
of it.
Connecting Primo Viaggio SL
6• Place the child in the car seat safety seat,
remembering to secure him/her with the
harness. Lift the chair with the handle (facing
the opposite direction to normal vehicle
movement) and engage to the base by
pressing down with both hands on the chair
until it clicks into place.
IMPORTANT: The two signals behind the
•
base go from red to green to indicate that
the child car seat is properly attached.
IMPORTANT: Once the procedure is
•
complete, move the child car seat to check
that it is actually attached.
7• Inside the car, the handle must be fully
lowered towards the backrest of the vehicle
seat, as shown in the figure. Press the round
9