Samsung DVD-V6700 Manuel D'instructions page 20

Connection to an
Amplifier)
1
Using a coaxial cable (not included), connect the
DIGITAL AUDIO OUT (COAXIAL)
the rear of the DVD-VCR to the DIGITAL AUDIO
IN (COAXIAL) terminal of the
2
Using the video signal cable(s), connect the
S-VIDEO or COMPONENT
rear of the DVD-VCR to the
COMPONENT IN terminal of your
described on pages 15 to 18.
3
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- When you connect the DVD-VCR to DTS Amplifier and play a DTS disc, set the DTS to On in Audio
Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 59 to 60)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
C
O N N E C T I O N S
Audio System (Dolby digital, MPEG2 or DTS
terminal on
Amplifier.
OUT terminals on the
S-VIDEO or
TV as
Amplifier to
ENG-20
Coaxial Cable
(not included)
Dolby digital or
DTS Amp.