Publicité
Les langues disponibles
Les langues disponibles
1. AttACh left leg
Assembly
a. Insert rear left leg assembly
b. Check the pop-up button locks
(LRL) into chassis opening.
into place.
4.
5.
and attach to rear left leg assembly.
Attach Rear Right Wheel (RWR )
to right leg assembly.
8. AttACh front leg
Assembly
Insert front legs into openings
Check the legs lock in place.
underneath seat.
2.
3.
Check that right hand leg height is
Remove right wheel from right leg...
adjusted so that it is the same length
as the left leg (3 adjustment
holes in the aluminium tube should
be visible). To adjust, pull lock to the
left and turn down.
6.
7.
Slot footbrake into left and right wheel
Final Rear assembly should look like this.
axles.
Attach front strut to front seat
tubing and close lock.
2
9.
Attach front wheel to front wheel
assembly.
11.
Loop the wrist strap around the handle
bar and back through itself. Always use
the wrist strap. Ensure that the handlebar
does not slip out of your hands.
10.
For swivel action, leave lock upright.
For locked wheel, press lock down with
wheel facing forward.
3
Publicité
