Table des Matières
Publicité
• Plaats het voorrooster van de ventilator op de achterbehuizing en maak
de onderdelen aan elkaar vast met de metalen klemmen. Draai de kleine
schroef vast.
• Plaats de motoreenheid bovenop de staande buis en zet deze goed vast
met de schroeven.
VOOR HET EERSTE GEBRUIK
• Haal het apparaat en de accessoires uit de doos. Verwijder de stickers,
de beschermfolie of het plastic van het apparaat.
• Plaats het apparaat op een vlakke, stabiele ondergrond. Zorg voor
minimaal 10 cm vrije ruimte rondom het apparaat. Dit apparaat is niet
geschikt voor inbouw of gebruik buitenshuis.
• Put the power cable into the socket. (Note: Make sure the voltage which
is indicated on the device matches the local voltage before connecting
the device. Voltage 220V-240V ~ 50-60Hz).
GEBRUIK
• Zet de snelheidsknop in de gewenste positie.
• Druk op de oscillatieknop om de ventilatorkop te laten oscilleren.
• Druk op de oscillatieknop om de ventilatorkop te laten stoppen met
oscilleren.
• De kop van de ventilator kan omhoog of omlaag ingesteld worden. Draai
de instelknop los, stel de ventilator in de gewenste hoek en draai de
instelknop vast om hem vast te zetten.
EN
Instruction manual
SAFETY
• This appliance shall not be used by children aged less than 8 years. This
appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Keep the
appliance and its cord out of reach of children aged less than 8 years.
Cleaning and user maintenance shall not be made by children unless
older than 8 and supervised.
• By ignoring the safety instructions the manufacturer can not be hold
responsible for the damage.
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
• Never move the appliance by pulling the cord and make sure the cord can
not become entangled.
• The appliance must be placed on a stable, level surface.
• The user must not leave the device unattended while it is connected to the
supply.
• This appliance is only to be used for household purposes and only for the
purpose it is made for.
• To protect yourself against an electric shock, do not immerse the cord,
plug or appliance in the water or any other liquid.
PARTS DESCRIPTION
Speed adjustment knob
1.
Oscillation knob
2.
Fan
3.
ASSEMBLY THE FAN (VE-5951/VE-5971)
• Remove the base nut from the standing pipe. And then insert the
standing pipe into the hole of base, put the heavy base under the base.
Fit the base nut back to the standing pipe and screw it on firmly.
• Remove the 4 screws from the motor unit.
• Fit the rear fan grill onto the motor unit. Make sure that the 4 holes on
the motor match the 4 holes on the rear fan grill. Fit the 4 screws and
screw it on firmly.
• Put the blade on the motor unit and carefully tighten the screw.
• Fit the front fan grill onto the rear cage and fix them together using the
metal clips. Tighten the small screw.
• Put the motor unit on the top of the standing pipe, screw it well.
Publicité
Table des Matières
