Assembling And Adjustments; Handle And Control; Transport Wheels; Cutting Depth Adjuster - KLIPPO ES 03 B Manuel D'utilisation

Handle and control

ES 03 B
• Fit the rod between the handle halves.
• Fit the handle on the handle stand-off.
• Fit the handle stand-off on the machine.
• Adjust the handle height. Tighten the knobs.
• Fit the throttle control on the right handle.
PS 045 H
• Fit the handle in the handle stand-off on the machine.
• Adjust the handle height. Tighten the nut.
• Fit the throttle control on the right handle.
• Fit the clutch control on the left handle.

Transport wheels

Fit the transport wheel in front of the engine.

ASSEMBLING AND ADJUSTMENTS

Cutting depth adjuster

The cutting depth is adjusted with the cutting depth
adjuster. The deeper you set the adjuster, the deeper the
cutter will work.

Engine oil

The engine is delivered without oil. Fill with engine oil to
the correct level. See instructions in the section
"Maintenance".
–
English 45