ELAC SUB3010 Mode D'emploi page 6

Installing the subwoofer spikes
The SUB3010 comes with a spike set that can be installed prior to use. Please follow the below steps when
unpacking and setting up the subwoofer. Due to the weight of the subwoofer we highly suggest having a
second person assist with this process.
1. Carefully unbox and remove the subwoofer from the box. Due to the weight of the subwoofer we suggest
using a second person. Place the subwoofer upside down on a soft non-abrasive surface.
2. Attach the spikes by screwing them into the threaded inserts on each of the four corners on the subwoofer.
3. If you are installing the subwoofer on carpet, carefully turn the subwoofer over and adjust for the spikes to
level the subwoofer.
4. If you are installing the subwoofer onto hardwood, tile or other non carpet surfaces please use spike discs or
do not install the spike to prevent any damage to your floor.
ELAC SUB 3010 Subwoofer | www.elac.com | Page 5