emerio CME-121523 3 Série Mode D'emploi page 26

Descaling:

Regularly descale the coffee maker. The intervals of descaling depend on the water hardness and frequency
of operation. In case of average water hardness we suggest descaling every 3 or 4 months. Please use a
commercially available decalcification agent.

Fill 400 ml of water into the reservoir and add the necessary amount of decalcification agent in accordance
with the dosing instructions.

Let the decalcification agent sink in the coffee maker for about one hour. Switch on the unit after one hour
and let the water pass through. After that you should brew water several times and rinse all detachable
components, in order to clean off any residue.
CLEANING AND MAINTENANCE

Before cleaning remove the mains plug and let the device cool down.

Never immerse the device in water. Please use a slightly damp cloth to clean the surfaces.

Avoid using acrid or scrubbing cleaning agents.

Keep the coffee maker in a dry place out of reach from children when cooled off and cleaned.

Do not wrap the cord around the device.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50/60Hz
Power: 800W
ENVIRONMENT FRIENDLY DISPOSAL
Recycling – European Directive 2012/19/EU
This marking indicates that this product should not be disposed with other household wastes. To
prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Emerio Deutschland GmbH
Höffer Weg 14
51519 Odenthal
Germany
Customer service:
T: +49 (0) 3222 1097 600
E: info.de@emerio.eu
- 25 -