Mass Storage; Settings Operation - AKASO C320 Manuel De L'utilisateur

00:0012
06/06/2019 10:51:26 AM
② Press "M" to exit when you finish to playback the video.
Note:
Press OK one time to stop playing, press OK again to continue playing.
Press to exit the current playing.
Press / to to backward/forward the current playing, 2X/4X/8X for options.
2. Playback recorded videos on Computer
Download Videos from SD Card
Way1. Connect the dash cam to the USB port of computer via USB cable;
Choose "Storage Mode" option on the screen of dash cam, press OK;
"Mass Storage" will pop out on the screen of dash cam, then you can copy the videos
from sd card.
Storage Mode

Mass Storage

08
1080P
Mass Storage
Note: The computer can be directly used as the power supply for the dash cam if you
choose the "Record Mode", and the camera will automatically start recording.
You can real-time preview, record, change the setting, etc.
Way2. Take out the card from the dash cam, then insert the sd card to the card reader and
insert the card reader into the USB port of the computer to obtain the videos in the card.

SETTINGS OPERATION

After turning on the camera, press OK button to stop recording firstly.
Press to enter into the settings interface.
Resolution
Loop Recording
WDR
Record Audio
Video
1/2
09