Royal Sovereign RDS-21C10 Manuel Du Propriétaire page 5

Trouble Shooting ：
This unit is equipped with a motor overload protection device. If the motor is overheated,
power will be cut off automatically. The normal short duty cycle for continuous shredding
at maximum capacity is 2 minutes on followed by 40 minutes of cooling time.
Power may stop due to:
1.Operating the shredder at the maximum capacity continuously for a prolonged
period of time, e.g. More than 2 minutes without stopping. This operations may
result in the activation of the automatic motor overload protection, which turns off
power to the unit. Should this occur:
A.Unplug the power cord from the AC outlet and wait at least 40 minutes for
the overload protection to reset. Tear or cut off any excess paper from
the top of the shredder.
B.Plug the power cord back into the electrical outlet and place the Switch in
REV. Pull the remaining paper out of the cutters. Place the Switch back
to the Auto position if necessary.
C.Return the setting to AUTO. The shredder is now ready to resume shreding.
2.Exceeding the shredding capacity - Inserting more than 10 sheets at one time,
or if the paper is not fed squarely into the feed opening. If this happens, you should:
A.Change the switch to "REV" position. Pull out the jammed paper.
B.Change the switch to "AUTO" position, the shredder is now ready for shredding.