Installation; Grounding Instructions - Wolf MS24 Guide D'utilisation Et D'entretien

INSTALLATION

Installation
The microwave oven can be used freestanding or built into
cabinetry using accessory trim to match Wolf L series or
E series ovens.
For freestanding applications, a minimum 2"
required at the top, rear and sides of the microwave oven for
air circulation.
For built in applications, refer to installation instructions
provided with the trim kit. Accessory trim kits are avail able
through an authorized Wolf dealer. For local dealer infor-
mation, visit the find a showroom section of our website,
wolfappliance.com.
|
6 Wolf Customer Care 800.222.7820
Electrical
Installation must comply with all applicable electrical codes.
The receptacle should be located within reach of the power
cord. For built in applications, refer to installation instruc-
space is tions provided with the trim kit for electrical location.
(51)
ELECTRICAL REQUIREMENTS
Electrical Supply
Service
Receptacle
Power Cord

GROUNDING INSTRUCTIONS

This appliance must be grounded. The microwave oven
is equipped with a cord having a grounding wire with a
grounding plug. It must be plugged into a wall receptacle
that is properly installed and grounded in accordance with
the National Electrical Code and local codes and ordi-
nances. In the event of an electrical short circuit, grounding
reduces risk of electric shock by providing an escape wire
for the electric current.
WARNING
Improper use of the grounding plug can result in a risk
of electric shock. Do not use an extension cord. If the
power cord is too short, have a qualified electrician or
service technician install an outlet near the appliance.
RATING PLATE
Rating plate location.
grounded, 120 VAC, 60 Hz
15 amp dedicated circuit
3-prong grounding-type
4'
(1.2 m)