Operating Instructions - Klarstein ICEFESTIVAL BULLET Mode D'emploi

EN
18

OPERATING INSTRUCTIONS

Step 1
Add water by manual: Open the lid, take out of the ice basket and fi ll the water
reservoir with water.
Note: Make sure the water is not over the bottom of the ice collecting tray.
Add water by auto fi lling: please connect the pipe at back of the unit to the water tap
directly.
Note: The maximum permissible inlet water pressure: 0.6 MPa. The minimum permissible
inlet water pressure: 0.14M Pa.
Step 2
Connect to the power
Step 3
Press the ICE button to turn unit on. The ice maker begins to work.
Note: For the fi rst three cycles, the ice may be small and irregular in size, or even no ice.
It lights up when the water in water tank is not
enough.
Press it to start the ice making.