Sage The Nutri Juicer Classic SJE95 Guide Rapide page 6

Assembly
Before fi rst use
Before using your juicer for the fi rst time, remove
and safely discard any packaging materials and
promotional stickers and labels.
Ensure the appliance is switched OFF at the
power outlet and the power cord is unplugged.
Wash the fi lter bowl surround, fi lter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with a soft
cloth. Rinse and dry thoroughly. The motor base
can be wiped with a damp cloth. Dry thoroughly.
1. Place motor base on a fl at, dry surface such
as a bench top. Ensure that the motor base
is switched OFF at the control panel, then
switch the appliance off at the power outlet
and unplug the power cord.
2. Place fi lter bowl surround on top of
the motor base.
6
3. Align the arrows at the base of the stainless
steel fi lter basket with the arrows on the motor
drive coupling and push down until it clicks
into place. Ensure the stainless steel fi lter
basket is fi tted securely inside the fi lter bowl
surround and onto the motor base.
FILTER BASKET
WARNING
The stainless steel fi lter basket contains
small sharp blades to cut and process fruit
and vegetables. Avoid touching the blades
when handling the fi lter basket.
4. Place the juicer cover over the fi lter bowl
surround, positioning the feed chute over
the stainless steel fi lter basket and lower
into position.
CAUTION:
SHARP BLADES