Step 2: Connecting To Power - Philips SPF3470/G7 Mode D'emploi

Philips Digital PhotoFrame
3. Pull out the back stand and adjust accordingly to the preferred
viewing angle.
• It is recommended to place the PhotoFrame horizontally, because
this direction provides the best viewing and operating experience.
• By using the wall mount holes, you can hang the PhotoFrame
horizontally or vertically on the wall.

Step 2: Connecting to power

1. Place the PhotoFrame on a flat surface.
2. Connect the power adapter as below (1), and press the Power
button to turn on the PhotoFrame (2)
• Power systems and plug types may vary depending on yourcountry/region.
• To turn off the PhotoFrame, press the Power button.
EN-10 Getting started