Understanding The Leds - Belkin TuneStage Mode D'emploi

Understanding the LEDs

TuneStage 2 Receiver Status
Power off
Power switched on
Pairing with Transmitter
Paired/receiving signal
TuneStage II Transmitter Status
Power off
Searching for Receiver
Paired/receiving signal
LED Behavior
Off
Blinks on/off in 0.5-second intervals for 20 seconds, then turns off
(Note: Receiver remains in standby mode, ready to detect a Transmitter.)
LED blinks rapidly for 60 seconds (LED will turn OFF after 60 seconds, but
the Receiver will remain detectable)
On
LED Behavior
Off
Blinks on/off rapidly for up to 60 seconds*
Blinks once every 2 seconds
*Universal Pairing Sequence:
The Belkin Transmitter will
automatically search for the last
connected/paired Receiver
device first. If no device is
detected, it will then search for
a new Receiver with a security
code of 0000.This sequence will
last up to a total of 60 seconds.
If no connection is made, the
Receiver will return to standby
mode and the Transmitter will
turn off.To retry pairing, press
"PLAY" on the iPod. Pairing will
automatically begin again.
Understanding the LEDs | 07
EN