Belkin TuneStage Mode D'emploi page 3

Setup Instructions
STEP 1: TuneStage 2 Receiver Setup
1. Power off your stereo system.
2. Plug the TuneStage 2 Receiver into one of your home-stereo, audio-source inputs using the
supplied audio cable, usually the "aux" input is a good choice. Do not connect TuneStage 2
to your receiver's "phono" input.
3. Plug the included power adapter into the TuneStage 2 Receiver and then plug the other end
������������������������������
into an AC outlet.
����������������������
4. Press in the power button located at the back of the TuneStage 2 Receiver.
5. Power on your home stereo and select the audio-source input to which the TuneStage 2
Receiver is connected.
������������������
2 RCA or 3.5mm Mini-Jack Stereo Connections
AC-Power-Adapter Connection
���������
���������������������������������������������
���������
������
Setup Instructions | 03
EN
����