Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Safeguards
Please read through this Installation Guide carefully before installing the Axis product. Keep the
Installation Guide for further reference.
•
Store the Axis product in a dry and ventilated environment.
•
Avoid exposing the Axis product to vibration, shocks or heavy pressure. Do not install the
product on unstable brackets, unstable or vibrating surfaces or walls, since this could cause
damage to the product.
•
Only use applicable tools when installing the Axis product; excessive force could cause
damage to the product.
•
Do not use chemicals, caustic agents, or aerosol cleaners. Use a damp cloth for cleaning.
•
Use only accessories that comply with technical specification of the product. These can be
provided by Axis or a third party.
•
Use only spare parts provided by or recommended by Axis.
•
Do not attempt to repair the product by yourself, contact Axis or your Axis reseller for ser-
vice matters.
•
This Axis product shall be used in compliance with local laws and regulations.
Transportation
•
When transporting the Axis product, use the original packaging or equivalent to prevent
damage to the product.
Battery Replacement
This Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-time
clock (RTC). Under normal conditions this battery will last for a minimum of 5 years. Low battery
power affects the operation of the RTC, causing it to reset at every power-up. A log message will
appear when the battery needs replacing. The battery should not be replaced unless required!
If the battery does need replacing, please contact www.axis.com/techsup for assistance.
•
Dispose of used batteries according to the manufacturer's instructions.
•
Risk of explosion if battery is incorrectly replaced.
•
Replace only with the same or equivalent battery, as recommended by the manufacturer.
Publicité
Table des Matières
