KT ST100 Manuel D'utilisation page 7

c
oNtRoLS
ST100 WELDER (1-0100)
2
1
ST180 WELDER (1-0180)
1
WELDING TIPS
•Only weld bare metal that has been properly cleaned, dried, and well prepared.
•Always weld smoothly and steadily for best bead appearance.
•Avoid welding in wind or drafty areas.
•Use shortest welding cable necessary and avoid bends or kinks.
•Diameter of welding electrode should be same thickness as metal to be welded.
•Set amperage according to recommended range from electrode packaging.
•Always use 100% argon gas when TIG welding.
3
4
2 3
4
www.ktindustries.net
PAGE | PAGE | PÁGINA
1. Stick/Tig Button
2. Voltage Indicator
3. Thermal Protection LED
4. Amperage Adjustment Dial
Stick Mode 10-80A
Tig Mode 10-85A
1. Stick/Tig Button
2. Voltage Indicator
3. Thermal Protection LED
4. Amperage Adjustment Dial
10-180A @ 240V
10-80A @ 120V
7
®
®