Garmin 010-12769-00 Instructions D'installation page 3

10
Secure the connector to the mounting plate using the
weather cap and the nut
Connecting the Active Speaker to the VHF
Radio and Handset
Before you connect the active speaker to the VHF radio and
handset, you should mount the active speaker
Considerations, page 2).
1
Route the female end of an extension cable (not included)
from the speaker mounting location to the VHF radio.
2
Connect the extension cable to an open STATION port on
the VHF radio.
3
Connect the male end of the extension cable to the short
cable from the active speaker.
4
Route the long cable from the active speaker to the handset
connector mounting location.
5
If necessary, install the cable from the active speaker in the
mounting surface (Installing the Handset Connector in the
Mounting Surface, page
6
Connect the handset to the long cable from the active
speaker.
Specifications
Dimensions (H×W×D) 111 × 111 × 56.5 mm (6.1 × 2.7 × 1.6 in.)
Weight 349 g (11.22 oz.)
Temperature range Operating: From -15° to 70°C (from 5° to
158°F)
Storage: From -20° to 70°C (from -4° to
158°F)
Compass-safe distance 50 cm (19.6 in.)
Water rating* IEC 60529 IPX7
Audio output power 2.5 W nominal, 4 W max.
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to
/waterrating.
Installation Instructions
.
(Mounting
2).
www.garmin.com
3