The Learning Feature - One for All URC-7140 Mode D'emploi

(How to copy functions from your original working remote onto the ONE FOR ALL 4
Example: How to learn (copy) the "I/II (mono/stereo)" function from your
original remote onto the "red key" on your ONE FOR ALL remote control.
1
2
Select the
corresponding
device e.g. TV
3
Press 9 7 5.
4
ATTENTION: Place both remote controls on a flat
surface. Make sure that the ends you normally
point at your device are facing each other.
Align both remotes also in height
First; Press the "red" key.
The TV LED will flash rapidly.
• If you want to copy other functions within the same mode, simply repeat step 4
pressing the next key you want to copy by learning.
• You can learn approximately 100 functions.
5
Press and hold the magic key for 3 sec.
10

The Learning Feature

3 sec.
< select >
3 sec.
--> The
2 - 5 cm
then;
Press the "I/II (mono/streo)" key.
The blue LED will blink twice to
confirm successful learning.
--> The
switch off.
WWW ONEFORALL COM
)
x2
twice.
x2
twice and