Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MUSIC PLAYBACK
The device you wish to associate with TS522D+ must support AVRCP (Audio Video Remote
Control Profi le) in order to control playback through it. Refer to the user manual of your device.
When the music is playing:
1.
Button PLAY/PAUSE
a. Press once to pause playback
b. Press again to resume playback
2.
VOL - button
(from the main unit, rotate the VOL/STB knob counter-clockwise)
a. Press once to decrease the volume by one step
b. Press and hold to decrease the volume in a consistent manner
3.
VOL + button
(from the main unit, rotate the VOL/STB knob counter-clockwise)
a. Press once to increase the volume by one step
b. Press and hold to increase the volume in a consistent manner
after reaching the maximum level, the display will show the label VOL MAX)
CAUTION:
listen to music at a moderate volume. Continuous exposure to high volume may damage your
hearing.
CONNECT THE LAST PAIRED BLUETOOTH ENABLED DEVICE
4.
The following is a quick way to connect TS522D+ to the last paired device.
When the product is in standby mode, press the STANDBY button and enter the BT mode
using the MODE button (if the unit is on, but in a different mode, press the MODE button until
you see BT). Turn on the Bluetooth device to be associated. It will be connected automatically.
The Bluetooth Mode LED will light when the connection is successful. If the product fails to fi nd
the last paired device, it will go into standby mode waiting for connection. In this status, the
previously paired devices may be connected to the unit.
RESETTING THE UNIT'S MEMORY
The unit can store up to 8 different Bluetooth devices. To clear the memory manually you must
be in the BT mode, in the pairing status (LED fl ashes quickly), press the PAIR button twice (with
an interval of about one second between presses) until it plays a "beep" sound. At this point, the
LED indicating the status of the Bluetooth switches off, and then it starts to fl ash again.
CAUTION:
After erasing all memory, the unit will go immediately into pairing mode and you will need to
follow the pairing and connection procedure of a new Bluetooth device.
Remember to delete the name of the radio also from the device you want to connect it to again,
in order to completely reset the pairing between the two devices.
34
PLAYING A DEVICE CONNECTED TO THE AUX INPUT
1.
Connect the jack cable (not supplied) from the external device (such as an MP3 player) to
the AUX IN
2.
Use the MODE button on the remote control to access the AUX IN mode, or press the
MODE knob on the main unit until the AUX IN source is displayed. The display will show
the AUX IN label.
3.
Use your device to control the playback, the volume level can be controlled either from the
connected device, or from the main unit. Use the MUTE button on the remote control to
mute the sound, and then restart it by pressing the same button again.
SETTING THE UNIT
Press the MENU button on the remote or press and hold the MENU/SELECT knob on main
unit to enter the menu of the various modes.
Press
on the remote, or rotate the MENU/SELECT knob on the main unit to select
the desired menu item and press ENTER on the remote control or press the MENU/SELECT
knob to enter the submenu or to save the settings. Press BACK to return to the previous level,
or press MENU again to exit.
MENU AVAILABLE IN DAB MODE
Press MENU to access the multiple functions of the DAB mode.
Use the buttons
to browse the various menu items.
Press ENTER to enter the selected menu item.
FULL SCAN: allows to perform a full scan of the DAB channels
MANUAL TUNE: allows to set the DAB frequency to be tuned
35
Publicité
Table des Matières
