Remote Control; Important - RADIO.CUBO TS522D+ Mode D'emploi

REMOTE CONTROL

STANDBY
MODE
INFO
EQ
SCAN
PLAY/
PAUSE/
PAIR
MENU
VOLUME +
VOLUME -
MUTE
1/6 2/7 3/8
5/10
ALARM
1 & 2
SNOOZE
Press this button to turn the radio on or off
press to toggle between the DAB/FM/
MODE
Bluetooth (BT) and AUX modes
In DAB FM mode, while receiving a broadcast
signal, press this button to display information
INFO
about the selected station
Press to access the preset equalization or to
EQ
create a customized one.
Allows you to run a full scan of the radio in
DAB mode. Press to search for the next
SCAN
available station in FM mode
Buttons to browse the menu in the various
modes.
Increases or decreases the frequency in the
FM mode, or selects the next or previous
DAB station available.
During playback via Bluetooth, press to start
or pause listening to the associated device.
PAIR
Hold for pairing a Bluetooth device.
Press this button to access the menu settings
MENU
Press to increase the listening volume.
Press to decrease the listening volume.
Press this button to select or deselect the
mute function.
4/9
Buttons to store or retrieve the set radio
stations (only in DAB and FM modes)
Press this button to set the alarm
1
(Alarm 1/Alarm 2)
This button has three different functions:
1. it stops the alarm when it is active.
2. it sets the dimmability of the LCD when
SNOOZE
the unit is off (4 levels of brightness).
3. it sets the time interval for repeating
the alarm when the unit is on
24

IMPORTANT

To avoid the risk of electric shock, do not remove the
screws located on the back of the product. There are no
parts whose maintenance can be performed by the user. If
necessary, contact qualifi ed service personnel.
The exclamation point within an equilateral triangle is intended to alert the user
of the presence of important operating and maintenance instructions in the
literature accompanying the product.
The lightning bolt arrow located within an equilateral triangle is intended to
alert the user of the presence of non-insulated "dangerous voltage" within the
product that may be of suffi cient magnitude to cause electric shock to the user.
WARNINGS ABOUT THE USE AND THE OPERATION OF THE UNIT
WARNING:
The main switch does not completely shut off all power from the AC outlet. Since the
power cord serves as the main disconnecting device for the unit from the power source,
the cord should be unplugged from the AC outlet to shut down all current fl ow. Then, verify
that the unit has been installed so as to easily unplug the power cord from the wall outlet, if
necessary. In addition, to avoid fi re hazard, the power cord should be unplugged from the AC
outlet if the unit is not going to be used for relatively long periods of time (for example, when
on vacation).
VENTILATION WARNING
Install the unit ensuring to leave room around it for proper air circulation and for improving heat
radiation (at least 10 cm from top, 10 cm from rear, and 10 cm from each side).
CAUTION
• The product case is equipped with small openings which also serve for ventilation, in
order to ensure reliable operation and to protect it from overheating. To prevent fi re
hazard, the openings should never be blocked or covered during operation (by objects
such as newspapers, tablecloths, curtains, or drapes, etc.) and the device should not be
placed on thick carpet or on the bed.
• If the plug of the power cord of this unit does not match the AC outlet into which you want
to insert the plug itself, it must be replaced with one fi t for the purpose. The replacement
of the plug of the power cord must be performed only by qualifi ed service personnel.
After replacement, the old plug cut off from the power cord must be properly disposed
of, to avoid possible severe electrical shock due to accidental insertion of the plug itself
into a live power outlet. If you do not plan to use the unit for a relatively long period
(e.g. during a holiday), unplug the power cord from the AC outlet.
25