LBA Home Appliance SOUNDMIX Manuel D'utilisation page 15

EN SOUNDMIX
For wood ceilings
Loosen the 4 screws on the bottom and
remove and keep for later one screw on
the side.
For concrete ceilings
Attach the light kit to the loosened
screws on it and then tighten the
screws. Replace the removed screw.
Remove the cross pin bolt and R-pin
from the lower part of the downrod.
Insert the canopy cover and the canopy
on the rod. Pass the cables carefully
through the rod.
Loosen the 2 coupler screws to insert the
downrod. Insert the bolt and lock it with
the R-pin. Tighten the 2 screws in the
coupler and place the canopy cover.
LBA H A
ome ppliAnce
13