LBA Home Appliance TRISPIN Manuel D'utilisation page 15

EN TRISPIN
For wood ceilings
Remove the cross pin bolt and R-pin
from the lower part of the downrod.
Unscrew the 2 svrews from the hanger
ball.
x2
For concrete ceilings
Slide the hanger ball down and remove
the bolt.
Insert the canopy cover and the canopy
on the rod. Pass the cables carefully
through the rod.
Relocate the bolt in the hanger ball. Put
the hanger ball in place.
Loosen the 2 coupler screws to insert
the downrod. Insert the bolt and lock it
with the R-pin. Tighten the 2 screws in
the coupler and place the canopy cover.
LBA H A
ome ppliAnce
13