Activate Noise Cancellation (Anc); Connect To A Bluetooth Device - Avantree BTHS-AS90P Mode D'emploi

Activate noise cancellation (ANC)

After power ON, slide ANC switch to "ANC"
Slide ANC switch opposite to "ANC"
Note:
You will NOT be able to use the ANC function when the headphones' battery is low.
If you want to use the ANC function in wired mode, please power ON the headphones first.

Connect to a Bluetooth device

Enter headphones into PAIRNG MODE - Slide the power switch to
LED flashes BLUE and RED
On your mobile device – Turn on Bluetooth and select "Avantree AS90P" to connect. If you are using a
Bluetooth transmitter, please enter your transmitter into PAIRING MODE (please refer to your transmitter's user
manual).
to activate the ANC function. The ANC LED light will turn
to deactivate ANC function, the ANC LED will turn off.
alternately.
position and hold for 3s until the
.
GREEN
3