Switching On The Appliance - EuroSteam Duet 6246 Manuel D'instructions

USING YOUR EUROSTEAM

Switching on the appliance

smoke: This transitory effect is perfectly normal and will disappear very soon.
1.
starts to warm up. When the on/off switch light remains on, the appliance has reached the
temperature and is ready for use.
Before using the appliance, clean the soleplate on an old cloth to make sure that the soleplate
and tank are clean and to allow residual test water that has remained inside the pipes to va-
porize.
2.
Steam does not come out immediately after pressing the steam button, because the water
has to pass from the tank to the steam generator.
3.
4.
button (F) and keep it pressed.
5.
ous steam lock slider upwards (Fig. 10).
10
®
GARMENT AND STEAM TRAVEL IRON
*For best ironing results use a mesh-type ironing board to
allow excess steam to escape.
*Always rest your Eurosteam
*Do not let soleplate contact anything that could scratch or
damage the soleplate, such as zippers or metal studs.
Fig. 10
®
iron on stable surface.
-