Casselin CFP8 Mode D'emploi page 20

Never install your appliance on inflammable surface.
- Do not install the appliance near open fireplaces or all hot sources.
- Clean carefully the appliance and accessories. Don't use abrasive products.
- Connect the appliance directly to a wall plug socket. The use of adaptors, multiple sockets
and/or extensions is not recommended.
- To properly service the fryer and to secure it 10 cm of clearance is needed on all sides of the
fryer.
- Before pouring oil in the tank check there is no water in it. Fill the tank with the required volume
of oil. Maximum and minimum oil level markers. These levels must be respected.
- We recommend using a good quality oil to preserve your appliance. Vegetal oil contents less
saturated grease. (If solid grease is used, always pre-melt it before adding it to the fry pot.
- Electric connexion: installation of this unit should be performed only by a qualified service
technician and in accordance with the actual text regarding accident prevention. All wiring
connections for this appliance must be made in accordance with the wiring diagrams furnished
on the appliance. To avoid electrical shock, this fryer must be adequately and safely grounded
(earthed). If the appliance is wired directly into the electrical power supply a mean for
disconnection from the supply giving a contact separation of at least 3mm in all poles must be
incorporated in the fixed wiring. This appliance must be positioned so that the plug is accessible
unless other means for disconnection from the power supply is provided.
- Oil must be changed regularly. Once cooling down, discard used frying oil, use appropriate
container in order to be recycled following the rule for the protection of the public health and the
environment, store in a tank in order to be recycled.
- Before pouring oil check the appliance is off. Once filled with oil to the proper level, you can
move the power switch to the on position. Then the green indicator light in green. Adjust the
thermostat on the chosen temperature. The green light turns off when the chosen temperature is
reached. Once your product is fried, lift the basket from oil, shake it to remove exceed oil. Never
close the lid when oil is hot, wait for it cool down.
WARNING !
With prolonged use, the flashpoint of frying oil is reduced. Discard the frying oil if it shows signs
of excessive smoking or foaming, or serious burns, personal injury, fire, and/or property damage
could result. Operating the appliance can reach very high temperatures. Sides and surface of the
food warmer can be hot. Before moving or touching your appliance let it cool down.
Hands and face must be protected against grease projections.
After use turn all control on the off position (thermostat on 0). Unplug the appliance.
REMARQUE !
Your appliance is provided with an overheating protection. When this protection has been activated you
must let your appliance cool down.
If overheating protection is stated regularly, contact your dealer.
To reset the appliance, press the reset button located on the back side of the appliance. You must
unscrew the plastic protection (counterclockwise), press the reset button and replace the plastic
protection (clockwise).
20