Mounting The Carrying Strap And The Protective Covers; Mounting On A Tripod - Carl Zeiss Sports Optics Victory 32 T* FL Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Instructions for use
The dioptre adjustment wheel is provided with a scale (visible when the focus-
ing knob has been pulled out, Fig. 3), the signs "+" and "–", and a click stop
in the zero position (0 D). The graduation lines of the scale are used for orien-
tation (setting the dioptre adjustment for different users).
After completion of this procedure, push the focusing knob back in all the way.
Note: Always use the same object to focus on both images!
For subsequent focusing on varying distances, use the focusing knob only
(Fig. 3/C). When the long ridge of the focusing knob coincides with the arrow
on the bridge (Fig. 3/D), the binoculars have been set to infinity. This only
applies if the dioptre adjustment mechanism has snapped in at the zero posi-
tion (0 D).

Mounting the carrying strap and the protective covers

The carrying strap, the rainguard and the protective caps for the objective lens
are provided in the packaging. Attach the carrying strap to the eyelets pro-
vided on the binoculars and mount the rainguard on the strap as shown in
Figs 4 + 5.
Note: Simply thread the carrying strap through the eyelets on the rainguard.
Before mounting the carrying strap as shown in Fig. 5, adjust the length of
the strap as required by loosening or tightening it accordingly using the clip.
The rain guard needs only to be attached on one side; however, it can be
attached to both sides.
Use of the eyepiece cap
The eyepiece cap is held on the eye cup with a snap latch.
Remove the eyepiece cap with your index fingers before using the binoculars.
The eyepiece cap should be reattached after using the binoculars to protect
the eyepiece.
The protective caps for the objective lens are attached to the binoculars as
shown in Fig. 6.

Mounting on a tripod

The binoculars of the Victory FL series can be mounted on any commercial
camera tripod using the Zeiss universal tripod adapter for binoculars.
● Cat. No.: Carl Zeiss tripod 1206-889
● Cat. No.: Carl Zeiss tripod adapter for binoculars 52 83 87

Publicité

Table des Matières
loading

Table des Matières