Roadstar PCD-435NCD Serie Manuel D'instructions page 5

CD OPERATION
1. Connect your earphones into the [HEADPHONES SOCKET] (11);
2. Press [OPEN] (8) to open the [CD DOOR] (9) and place a CD with the label up in
the CD compartment;
3. Close the [CD DOOR] (9);
4. Press [PLAY] (2). Focus search is performed and playback will start automati-
cally from the first track;
5. Adjust the volume with the [VOLUME KNOB] (10) to the desired level;
6. To turn the unit off, press the [STOP] button (3) twice.
Note:
Press [PLAY-PAUSE] (2) to play. When it plays, press to stop playback tempo-

rarily and press again to resume playback.
Press [STOP] (3) when you want to finish playback. Press twice to switch OFF

the unit.
Press [SKIP -] (4) to go to the previous track, press & hold to go back fast.

Press [SKIP +] (5) to go to the next track, press & hold to go fast forward.

PROGRAMMING
Up to 20 tacks can be programmed and play in any order.
1. Stop the playback by pressing [STOP] (3);
2. Press [PROGRAM] (6), the display (1) will show the number of the track
on the left side and the number of program on the right side.
3. Select desired track by using [SKIP -/+] buttons (4/5);
4. Press [PROGRAM] (6) to confirm desired track into the program mem-
ory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory.
6. When all the desired tracks have been programmed, press [PLAY] (2) to play the
disc in the order you have programmed.
Note: Press [STOP] (3) to terminate programmed play.
REPEAT - RANDOM MODE
During playback, press repeatedly the [MODE] (7) to select:
REP-ONE: The current track is played repeatedly.

REP-ALL: All tracks are played repeatedly.

RANDOM: Tracks are played randomly.

INTRO: All tracks are played for 10 seconds.

English 2